|Home||» Products||» Mixers||» Cone Screw Mixer (Nauta Mixer)|
We have marked a distinct position in the domain by manufacturing and supplying the finest quality Cone Screw Mixer. The mixer provided by us is manufactured at our well-equipped production unit using the finest quality components and the latest technology in compliance with set market standards. Widely used for mixing dyes, herbal, pharmaceutical, plastic, food, ceramic, agricultural products, shampoos, tooth paste and chocolates, this Cone Screw Mixer is made available in various technical specifications at reasonable rates.
Rust proof body
Cone Screw Mixer
Cone screw mixer consists of a conical container which houses a continuous flight screw.The screw rotates about it's own axis and revolves along the walls of the cone. The material of widely differing densities and particle shapes and sizes are mixed homo genously without any degradation. Fragile filaments and flakes are safe from degradation and mixing is accomplished with minimal heat build-up and aeration in the product. The floor space required for this type of mixer is very less. The mixer can be started on full load. Due to the conical shape the unloading of the material is helped by gravity and is complete without any hold-up. Addition of liquids is easily possible by providing atomizing nozzles at the top of the mixer. There are no bearings or seals in direct contact with the product.
Various design options available are :
Capacities from 20 to 25000 liters.
Supported mixing screw at vessel bottom.
Sanitary designs for pharma applications.
Jacket/ Limpet for heating or cooling.
Solvent recovery system
Exceptional Mixing Accuracy
Materials are mixed successfully to an accuracy of 1 part in 1,00,000(0.001 %) or better. With no degradation or separation, it thoroughly blends materials of widely differing densities and particle shapes and sizes.
Short Mixing Time
It achieves a thoroughly homogeneous mix in 30 to 40 % the time of most conventional mixers in the same category such depending on mixing element speeds.
Low Power Consumption
Cone screw mixer (Nauta Mixer) require approximately 50% power over conventional blender.
Gentle Mixing Action
Fragile filaments and flakes are safe from degradation and mixing is accomplished with minimal heat built-up and aeration in the product.
Low Floor Space Required
Since mixer occupies less floor space, user can free up space for other plant operations.
Full Load Starting
Its screw agitator begins axially rotating and loosens batch material before its orbiting motion starts. This design feature prevents stalling and permits starting under full load in the event of a power failure. Soft starters are available to reduce excessive torque at start-up.
Fast, Complete Discharge
Its unique cone design provides for gravity unloading, gives cleaner and faster batch discharge.
Easy Liquid Addition
Liquids are injected and atomized into the top of the mixer through the hollow shaft of the drive system.
Mixing of Partial Batches
Partial or full load batches are mixing equally well with no reduction in mixing efficiency.
Easy to clean
The top entering drive system provides full product protection with no bearing nor seals in direct contact with the product. Its unique obstruction free cone shaped design allows for quick and easy cleaning.