Conical Blender - Conical Blender Exporter, Manufacturer & Supplier, Pune, India

Product Code : 12

Product Specification

Conical Blender

Conical blender consists of a conical vessel with a double start helix ribbon mounted on central shaft. This type of blender is used for mixing, granulation and homogenizing applications. It handles a range of applications from all types of powders including free flowing to cohesive and moist powders, bulk dry materials to wet cakes and slurries.

Mixing time depends on the ribbon speed. The rotating central agitator shaft does not have bottom bearing support thereby eliminating any dead spots or difficult areas to clean and there is no possibility of product contamination.
Discharge of the product is fast and simple as the bottom is fully open.

Various design options available are

Models with single or double helix.
Capacities from 20 to 25000 litres.
Cutting rotors for breaking of agglomerates.
Liquid addition provisions.
Heating / Cooling jacket or limpet with insulation.

Features of RAJ Conical Blenders

Raj Conical Blenders are best suited for mixing, granulation & homogenising batch process. It handles a range of applications from all types of powders including free flowing to cohesive & moist powders, bulk dry materials to wet cakes & slurries.
Raj Conical Blenders are very sturdy and robust. They consists of a conical vessel with dished / flat head. The central agitator shaft is driven from top end with gear reducer.
A double helical ribbon agitator in the vessel moves the product upward along the outer wall and releases it downward into cavities developed in the middle, simultaneously material is horizontally distributed by the mixing arm and is optimally homogenised.
Mixing time depends on the agitator speed. In general mixing time is three to four times shorter than the mixers working with a rotating screw. The drive and bearings are kept outside of the vessel, no gears or seals in the product compartment. The rotating central agitator shaft does not have bottom bearing support there by eliminating any dead spots or difficult areas to clean and there is no danger of product contamination. Discharge of the product is fast and simple as full bore open.

Design options

Models with single or double helix.
Net capacities for 20 to 25000 litres.
Various Material and surface treatment available depending upon product characteristics.
Cutting rotors for breaking down of agglomerates.
Liquid addition by ISP system.
Heating Cooling jackets with insulation.

Features

Material are mixed to highest levels of accuracy even if some of the components are present in minor quantity
It has flexible working capacity to 10 100% of filling rate
Disintegration of agglometrates most often without additional tools
Easy to clean
Dust-and ex-proof models
Space saving construction
Various shaft sealing system
Product discharge through gate, isem, ball segment or ball valve
No danger of product contamination by lubricants.

Application

Food
Pharmaceuticals
Chemical
Building material
Matallurgy

Raj Conical Blender Standard Models

Capacity (LIT.)	Motor	Overall Dimensions (mm)
	HP	A	B	C
100	3-5	900	1030	1470
200	3-5	1075	1320	1760
500	5-7.5	1375	1765	2205
750	5-7.5	1540	2035	2475
1000	7.5-12.5	1750	2310	2890
1500	7.5-12.5	1975	2656	3240
2000	10-15	2125	2810	3390
2500	10-15	2440	3295	4725
3000	12.5-20	2565	3485	4905
4000	15-25	2740	3755	5185
5000	15-25	2940	4065	5410
7500	20-30	3315	4640	5990
10000	25-40	3565	5010	6300
15000	40-60	3315	4640	5990
20000	50-75	3564	5010	6300

Other Products in 'Blender' category

Ribbon Blender

<< Back